Yamaha P-95 Stand Screws


Yeah, I know that this isn’t Virtualization related, but I scoured the internet over the weekend and wasn’t able to come up with this bit of data (and so had to go the trial-and-error route)… and this is my best venue for adding it to the Google Index.  If you’re building a piano stand for a Yamaha P-95 B digital piano, you will need 4 very specific bolts in order to attach it to the stand.  Those bolts are standard 10-32, and the threaded holes on the bottom of the piano are at least an inch deep.  No, I'm not mechanically inclined and no, I don't know what those numbers mean besides a nebulous concept of "size".  And now back to our regularly scheduled programming.

Comments

  1. UnknownOctober 24, 2012 at 7:00 PM

    Thanks for posting this, as I was looking for this info. 10-32 is an imperial (US) size 10 (around 3/16 inch) with 32 threads per inch.

    It's very similar to the metric M5 thread though, in both diameter and pitch, so I was wondering if you checked whether M5 was a better/worse fit? I'd guess metric more likely in a modern device, especially coming from a Japanese company.

    ReplyDelete
    Replies
    1. Jason ColemanOctober 24, 2012 at 9:02 PM

      Thanks for the clarification around what those numbers mean. I didn't try an M5 (to my knowledge) - my trial and error process was me grabbing a bunch of different sized bolts/screws that I had lying around until I found one that fit. I then took it to a hardware store and used one of their 'charts' (which was just a bunch of labeled nuts) to figure out what size it was. I then bought 4 of them and mounted the piano to the bench. It does sound like an M5 would be a more likely fit and that I just found something that's "good enough".

      Delete
  2. UnknownNovember 4, 2017 at 6:40 PM

    M5 doesn't fit. I just tried it. Your original trial and error had better results. Thanks!

    ReplyDelete

Post a Comment

Sorry guys, I've been getting a lot of spam recently, so I've had to turn on comment moderation. I'll do my best to moderate them swiftly after they're submitted,

Popular posts from this blog

PowerShell Sorting by Multiple Columns

PowerShell's Sort-Object cmdlet is super useful, especially when preparing output for human consumption.  A few people have found my blog while looking for more information about its use, specifically while looking for how to sort by multiple columns (well, properties, technically).  I've never done so (much less written about it), so I hope those folks found answers elsewhere.  But, it got me curious... and it turns out that it's really easy. The Technet article on Sort-Object has the answer directly spelled out: just use commas to create a list of properties to sort by (in order to precedence).  Let's look at some examples!  First, prepare a variable with some good sortable data: $myData = get-eventlog System -newest 25 And then we can get to sorting!  Say you want to sort primarily by EntryType (Warning, Information, Error) and then by Source.  Easy-peasy: $myData | sort EntryType,Source How about if you want it to be in descending order?  Yeah, there&
Read more

Clone a Standard vSwitch from one ESXi Host to Another

One of my customers is standardizing the configurations on their HP C7000 enclosures (they've been set up at various sites by various administrators with varying involvement from the architecture team).  As such, we need to stand up some temporary resources so that we can take down the main enclosure for reconfiguration.  That's fine, we can easily ship a smaller enclosure to each site for temporary compute resources.  Some of the sites are using Standard vSwitches, so we need to be able to quickly copy the networking configuration over from their existing blades to these new, slightly different blades.  As I see it, we had 2 good options: 1) Capture a Host Profile with the desired vSwitch configuration.  Delete every other component of the Host Profile so that only the networking section is applied; design the new ESXi hosts so that the vSwitches'll work with the old vmnic-to-vswitch configurations. 2) Write a script to clone the vSwitch from ones ESXi host to another.
Read more

Deleting Orphaned (AKA Zombie) VMDK Files

A problem that most Virtualization Administrators need to deal with is Orphaned VMDK files (or Zombie VMDK files, as some people call them).  These are Virtual Machine hard drive files that are just hanging out, taking up storage, but are attached to no VMs.  How can this happen?  Well, the most common way is when an administrator needs to delete a VMDK but isn't quite ready to commit... so, after pressing "remove", they select "remove from virtual machine" rather than "remove and delete files".  The intent is always good: "I want to be able to restore this if it turns out to be necessary... so I'll just come back and delete it next week if nothing breaks!"  But, of course, next week something else happens and the file doesn't get deleted.  After a little while, it turns into "which files did I rename, again?" and nothing seems to happen. So, how do you deal with these orphaned files?  Well, a few years ago I found a scrip
Read more